oCamS-1MGN-U_User Manual_Getting Started(E)

oCamS-1MGN-U Getting Started
www.withrobot.com Page 10
3. HOW TO SET-UP
Preparation for Connection
The oCamS-1MGN-U is connected to a host system with a USB cable. Both of USB 2.0 and USB
3.0 cables can be used, however USB 3.0 should be used for higher resolution images.
The connectors for USB 2.0 and USB 3.0 are different on a host system, so that the right
connector should be selected for optimal operation.
USB 3.0 Cable
USB 2.0 Cable
Picture 7. Supported USB Cable Types