oCamS-1MGN-U_User Manual_Getting Started(E)

oCamS-1MGN-U Getting Started
www.withrobot.com Page 11
4. CONNECTION TO WINDOWS SYSTEM
How to Connect to Windows System
After connecting the oCamS-1MGN-U, the connection can be checked by reviewing the device
manager.
On successful connection, the oCamS-1MGN-U should be appeared under the camera devices,
and the IMU should be appeared as USB serial device with the assigned COM port number
under the COM & LPT port.
Picture 8. Device Manager on Successful Connection
Note
On Windows 7, the IMU of the oCamS-1MGN-U is not detected, but only detected as a camera
device.