Operation Manual

Operation
10.2010 FB 7100 11
Tea Multibrew
Lemontea
5
Pot panel (Multibrew)
How to brew a pot: (fig. 5)
• Insert key in multi-brew lock and turn
clockwise.
A predefined number, eg. ‘4’ is shown in
the display.
• Place a pot on the pot platform.
• Press the pot button once or more times
for the desired number of portions.
Pressing again will increase the displayed
counter by one, up to the maximum value
(15 or lower, set by the technician).
When the counter reaches the maximum
value and the pot button is pressed once
more, the counter restarts at the
predefined number.
• If the machine is not set to free vend,
insert a card with sufficient credit, or
insert an amount of coins corresponding
to the value of the number of drinks
selected or a value above.
• Press the selection button for the wanted
drink.
The display steps back one number each
time a portion is dispensed, or if
‘optimised multibrew’ is active a
progressive bar is shown.
• Remove the pot when the drinks have
been dispensed.
• Turn key anti-clockwise and remove it to
finish the multi-brew function.
A pot brew in progress can be
stopped immediately, simply by
pressing the cancel button ©.
The pot sensor may not register a
pot of transparent material, eg.
glass.