Operation Manual

Occasional routines
10.2010 FB 7100 55
Rinsing / descaling the brewer
The brewer rinse procedure automatically
carries out four rinse cycles, one time with
cleaning agent and three times with clean
water (fig. 57).
• Have an empty pot (min. 1.5 l) and
cleaning or descaling agent ready.
• Open the door, remove the coffee canister,
turn to the display and follow the diagram
to perform a rinse of the brewer.
Do not stop the rinsing before the
full four cycles are completed as
otherwise residues of the cleaning
or descaling agent may remain in
the brewer and outlet hose.
Should the procedure be inter-
rupted, e.g if the door is
accidentally opened too early, the
brewer must either be
disassembled and rinsed manually
or a new rinse procedure must be
performed.
There is a risk of scalding from hot
water.
Most descaling agents are caustic.
To protect your eyes and your skin
follow the manufacturer’s
instructions
End
Rinse total machine
Rinse with stop
Rinse with stop
Rinsing-please wait!
Sel
*Open door
*Remove FB canister
*Add cleaning agent
*Close door
*Open door
*
Reposition FB canister
*Close door
*Empty pot
*Repeat if necessary
1
v
Wait until program
has finished
(1) (2) (3) (4)
-----SHORTCUTS-----
* (1)=Rinse 3=Counter
(2)=Return 4=Menu
Start
*Close door
*Place pot
on pot platform
Sel
Add cleaning agent
and close door
FB 7100
57