Operation Manual

Display messages and trouble shooting
10.2010 FB 7100 77
Display messages
If the vending machine shows one of the display messages mentioned below, please follow the suggestions for remedy under Corrective ac-
tion. If the error remains, please call for service.
If a display message appears that is not mentioned here, please call for service.
Display message Corrective action
Cleaning required
• The 'rinse time period' is exceeded. Clean the machine and
use one of the rinse functions, see “Rinsing machine” on
page 35
Energy saving mode
• Energy saving is active. At the press of a selection button, the
machine will return to vend mode. When the water is suffi-
ciently heated, the machine is ready to dispense drinks.
• If the selection panel is left untouched for 10 minutes, the
machine will return to energy saving mode.
Out of service
• Turn the machine off and on.
Rinse in progress...
• Wait until machine has finished automatic rinse function.
Temperature low
• Wait until the water is heated sufficiently
(maximum 13 minutes)."
Water level low
• Descale water inlet valve.
• Remove impurities from water filter. Replace if necessary.
• Remove impurities from water supply connection.
Base tray full
• Empty and clean base tray. Wipe it dry.
Drip tray full
• Empty and clean drip tray. Wipe sensor dry.
Please remove cup
• Remove cup from cup carrier.