User manual

11
WT-1041 3G Camera
WT-1041 – User Manual – Rev.1.2 - Technical Support: [e-mail]
COPYRIGHT ©2009 WITURA CORPORATION SDN BHD
>> Type following message via the phone:
In English: set host “set host” your phone num 8888(original password)
>> Sent the message to the to the SIM Card of the WT-1041 3G Camera
>> If succeed it will reply the SMS “Set Host Number OK” or “Failed to Set
Host Number”
>> Now you can test by making a video call to the WT-1041 3G Camera and it
will enter the monitor mode.
4 =Camera turn left
5 =Stop Rotating
6 = Camera turn left
1 = Turn on speaker
3 = Turn on speaker
*/# = On / Off Infrared
>> Input following message via phone:
In English: add share*number you want to add*password
>> If succeed WT-1041 3G Camera will return a message “Add Share Number
OK” or “Failed to Add Share Number”.
1. Input the following message via the phone:
In English : del share*telephone number* password
2. Send the message to WT-1041 3G Camera
Note : This 3G Camera can be shared up to 50 numbers at most
: The host number must set those numbers as share number via Message
order
: Share number can do all operation except those need password or get
p
assword
DTMF Command By Phone
Share Number Setting
Delete Single Share Number