Specifications
WITURATECHNOLOGYSDNBHD|WT‐1672A GSMPowerOutageAlarm UserManualV1.8 13
ProductionSpecifications
OperationVoltage 110‐240Vdc
OperatingCurrent Maximum500mA,typically55mA
RelayContacts 1xNormallyOpenandNormallyClosedContacts
 maximumswitchingcapacity20amps@230vacperrelay
GSMFrequencyMHz GSM850,GSM900,GSM1800,GSM1900
Humidity LessThan80%RH
OperatingTemperature ‐20cto55c
PhysicalSize 130x100x50mm
Weight 500Grams
Indicators Relay,Telco,Power
Protection IP65WeatherProofCasing
Approvals C.E,FCC,ETSI
Troubleshooting
1.  RedpowerLEDnotalight
Ensure that your DC power supply is connected
correctly,positive(+)toterminal220vandnegative(‐)
to terminal N. Verify 12 volts is present using a volt
meter
2.  BluenetworkLEDflashingeveryonesecond
andnotevery3seconds
Ensure yourSIM cardhasbeenactivatedandthatthe
PIN request has been disabled. If the unit is in a low
signal strength area consider using an external GSM
antennaorchangingtoanothernetworkprovider
3.  Iamnotreceivingconfirmationtestmessages
whenprogramtheadministratorsnumber
Ensureyourtelephonenumberis intheAdministrator
list and that sendingtextmessages toyour number is
enabled.
4.  Iamnotreceivinganytextmessageswhen
initiallyprogrammingtheunit
Ensure the unit is connect ed to the GSM network by
observing the blue network LED; it should be flashing
once every 3 seconds (see 2 above). Ensure the SIM
cardhascredit
5.  Theunithasbeenworkingforseveralmonths
andhasnowstoppedrespondingtocallsand
textcommands
MostbutnotallPAYSIMcardswillbede‐activatedby
thenetworkifnotusedtomakeanoutgoingvoicecall
orsend an SMS text messagewithinaspecific
period.
To prevent this simply send a txt command *0*PW#,
then*2*, it willreply by textmessage, dothisoncea
monthtokeeptheSIMcardactive










