Specifications
WITURATECHNOLOGYSDNBHD|WT‐1672A GSMPowerOutageAlarm UserManualV1.8 9
14 SMSReplyMessagewhenthe
systemON/OFF
*21*N# Message switch<ON>
2013‐10‐1017:06Thu
N=0 means SMS Reply Message
when the system OFF
N=1 means SMS Reply Message
when the system ON
Factory Default as SMS Reply
Message wh en the system ON
If setting to not receive SMS
ReplyMessage
whenthesystem
OFF, the unit will return a
message indicate successful
setting for the command and it
willnolongersendingSMSreply
until the setting of SMS Reply
MessagewhenthesystemONis
done. When the system having
the temperature alert, it will
automatically sending the alert
message
totheAdmin
15 ToreceiveSMSReplyMessageor
nottoreceiveSMSReplyMessage
whenthesystemtriggerbyphone
call
*22*N# Whensending
command*22*0#
Statusswitch<OFF>
2013‐10‐1017:10Thu
Whensending
command*22*1#
Statusswitch<ON>
2013‐10‐1017:08Thu
N=1 means after make the
phone call to the system, it will
returntheSMSfor the status to
thecaller
N=0 means after make the
phone call to the system, it will
not return the SMS for the
Status to the caller
Factory Default as return SMS
for the status after make the
phonecall
**Ifyoudecidenottoallowthe
system to text you for any
acknowledgementafteryoucall
totheunit.YoucanswitchOFF
the text message.Some
Customer request this function
becausetextsreplyinvolvedcall
cost
16 Securitymode/OpenMode *23*N# WhenSettingasSecurity
Mode*23*1#
Modeswitch<ON>
2013‐10‐1017:13Thu
WhenSettingasOpen
Mode*23*0#
Modeswitch<OFF>
2013‐10‐1017:13Thu
N=1 means in security mode.
Onlyallowthenumberinthelist
can text to the
unit to control
the system.
N=0 means in open mode.
Anybody can call to the unit to
control the system. Please take
note that the Privacy and
Security before you decide to
use the Open Mode
Factory Default is N=1 for
SecurityMode










