GSM/GPRS Wireless Modem WT-211 User’s Manual
WT-211 GSM/GPRS Wireless Modem_______________________________________ Contents Interface for WT-211 Wireless Modem……………………………………………………………………..2 LED Indicator for WT-211 Wireless Modem…….........................................................................................2 Installing SIM Card………………………………………………………………………………………….2 Install and start the WT-211..…………………………………………………………………………….….3 Test the connection of PC and Wireless Modem…………………………………………………………….
WT-211 GSM/GPRS Wireless Modem_______________________________________ Figure 2 Install and Start the WT-211 Step 1: Connect PC and Modem: Connect the “15-pin SUB D” port of wireless modem and PC’s serial port with standard cable provided. Step 2: Install antenna: Screw on antenna. Step 3: Install SIM card according to “Installing SIM Card” Step 4: Start wireless modem: Connect the 4 pins Micro-Fit™ power adapter to the wireless modem, the LED indicator (Network) flashes.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Figure 4 Select the PC’s serial port that has connected to wireless modem, such as “COM1”. Press “OK” to enter port settings. The following dialogue box should appear. Figure 5 Select baud rate (i.e., Bits per second) for wireless Modem is 115200 with data byte of 8 and stop byte of 1 as shown in Figure 5. Press “OK” and the main interface of HyperTerminal appears.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Data Connectivity for GPRS Before data connectivity for GPRS, please make sure the modem is ready for work as a wireless modem. While modem is ready for GPRS, it is working in data mode. Installation using Window XP Before entering into data mode, ensure that the WT-211 wireless modem is power up in according to the Install and Start the WT-211 section of the user’s manual.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Figure 8 Select “Modem” Tab. Click on “Add”. Figure 9 Select “Don’t detect my modem; I will select it from a list” and then click on “Next”. After a short while the following screen should appear. WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Figure 10 Select “Standard 33600bps Modem” and then Click on “Next” Figure 11 Select the connected port, and then click on “Next”. After a few minutes, the following screen will appear. WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Figure 12 Figure 13 Click on “Finish”. The following screen will appear. WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Figure 14 Select the “Modem” tab and click on “Properties”. Figure 15 Select a value for “Maximum Port speed” as 115200. WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Click on “OK”. Figure 16 Select “Advanced” tab. Enter “Extra initialization commands” as AT+CGDCONT=1, “IP”, “*” * depend on service provider for GPRS. Example: maxis Click on “OK”. Stage 2: Testing the Modem Connection Select the “Diagnostics” tab. Click on “Query Modem”. After a few seconds the following screen should appear. WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Figure 17 The screen means the modem connection is successfully. Stage2: Connecting to the Internet Figure 18 WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.
WT-211 GSM/GPRS Wireless Modem_______________________________________ From the Control Panel double click on “Internet Option” The following screen will appear. Figure 19 Select “Connections” and then click on “Add”. Figure 20 Select “Dial-up to private network” option and then click on “Next” WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Figure 21 Key in the Phone number that provided by the service provider Click on “Next”. Figure 22 Enter a name or use the default one. Click “Finish”. The following screen will appear. WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Figure 23 Click “OK”. Please change the dial-up server to “SLIP” Figure 24 WT-211 – USER MANUAL – Rev.1 – Technical Support : Technical@witura.com - www.witura.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Then click the Properties of Internet Protocol Figure 25 Put in the IP address that provided by the service provider. You can enter corresponding characters as User name, Password and Domain and then click “OK” or Click “OK” without entering anything. Your computer is now ready for connection to the Internet. From the Control panel, double click on “Network and Dial-up Connections”.
WT-211 GSM/GPRS Wireless Modem_______________________________________ Click on “Dial”. When on-line, there is a computer icon in the bottom right of the screen. Note: If the telephone handset is lifted, or you are making or receiving a voice call, the WT-211 wireless modem will not respond to any data commands. Figure 27 Figure 28 Stage 3: Disconnecting from the Internet To terminate the connection, left click on the icon. The following screen will appear Figure 29 Click on “Disconnect”.
