WT-216 G GP PS S/ /G GS SM MC Ca arr A Alla arrm m& &T Trra acck kiin ng g User Manual W R C O R O R O N S D N W T U A P A T B H D OR NS SD DN NB WIIIT TU UR RA AC CO RP PO OR RA AT TIIIO ON BH HD D
WT-216 USER MANUAL Brief Introduction The GPS/GSM Car Alarm system (Model: WT‐216) is the advanced car security with GPS Position , It can be operated by telephone/SMS/remote control. This system is designed for individual user and Group. Users can track the car by our management & Monitoring software or free Google‐map! WT-216 (V3) – USER MANUAL – Rev 1.0 – Technical Support: Technical@witura.
WT-216 USER MANUAL Main Features & Functions 1) Car owner can monitor cars in real time Car owner can directly monitor everything in the car, including sounds of people talking, noises of damage, etc after inputting password. He/she can provide information to guard the car against theft and ask for help without anyone knowing it. 2) Short messages will be sent to car owner’s mobile phone and the center if the car is shocked gently and illegally.
WT-216 USER MANUAL 7) Long‐distance network of the center can remotely control the car to cut off power and gas supply (The Monitoring software support is necessary) If the car or the person in the car is in danger, if necessary, the center can remotely control the car to cut off power and gas supply. The car will be power off slowly or it can not start.
WT-216 USER MANUAL 13) Remote control the central control lock . Can match with the products to achieve alarm activation, alarm disarmament, etc. 14) Brake And Lock In the process of every open the door –close the door—drive the car, system will automatically lock the car when first brake. If the car doors are not close suitably, turn signal will remind the owner. the key is in the OFF place when the car is power off, the car door will automatically open, which will make you and your drive safer.
WT-216 USER MANUAL Hot Start Warm Start Cold Start Height Speed Acceleration Working Voltage Power Consumption Power Consumption Housing Operation Temperature Storage Temperature Humidity < 8 Seconds < 38 Seconds < 60 Seconds 18000 meters(60000 feet)max. 515 meters / second(1000 knots)max. 4g max. 5 to 24 VDC 0.8W 1.
WT-216 USER MANUAL Operation Procedure 1) Remote control : Arm 2) : Disarm : Emergency help button :Car finder Operation Operating mode GPS/GSM System Status 1. After arming successfully, the indicator Method 1. Press Arm key flash quickly on the remote twice a control for 0.5 second. seconds. 2. If there is Or alarming, the Method 2. indicator Use car owner Would flash mobile phone slowly once a to call vehicle second GSM SIM card. Arm operation Indicator Status Vehicles Status 1.
WT-216 USER MANUAL disarm key on the remote control for 0.5 seconds Or Method 2. Use car owner mobile phone to call vehicle GSM SIM card. 2. If there has been a alarming, the indicator flash quickly once a second Or Method 3. Use any mobile phone to send disarm command message to vehicle GSM SIM card instruction to the vehicle Emergency help Emergency help (can use this operation function in both Arm or Disarm Press 2.
WT-216 USER MANUAL emergency help Status) button ” ” on remote control for 3 seconds Search Vehicle Operation alarming message to car owner and center once per 20 minutes until the alarming is relieved. indicator would slowly flash once a second Search the vehicle The indicator flash once The vehicle turn light flash 5 times, and siren sounds 5 times. No message Robbery alarming The indicator doesn’t light. The vehicle turn light doesn’t flash, siren doesn’t sound. It is “voiceless alarming”.
WT-216 USER MANUAL (ii) If you are not in China, please set up the next step. You need sent the message CEN666666#78:* to vehicle SIM card.* is stand for the number of cell number.( if the total number is singular(eg:11) you need to add one number. If even number is even numbers(eg:12),do not need add.eg.) For example, the phone number is 13812345678,it have 11 numbers, then add one. It became 12. finally you can send CEN666666#78:12 to vehicle SIM card, the device will send back CEN666666#78:9168.
WT-216 USER MANUAL 111111STP This message aims to disable vehicle. The system would send back a message of disable vehicle and current position of vehicle. 111111RES This instruction is to restore the car to normal status after stopping the car. 111111CHK This instruction is to inquiry the system status & information. The system will send back the SMS, includes the similar information as Arm set, vehicle position 111111MON* This instruction is to monitor the voice around the car.
WT-216 USER MANUAL The owner can use his mobile phone number which set up by Center to Arm or Disarm the vehicle Attention: the car owner mobile phone number is set by Message of “CEN666666* 10owner mobile phone number*20*30center phone number*”. After this message, the system would recognize the car owner number is its owner, and center number is its center. 1)Arm Use the owner mobile phone to call system GSM SIM card, hang up after several sounds.
WT-216 USER MANUAL 3) The GPS antenna may adsorb on the metal object, or glues reliably with the width sponge force two‐sided rubber, please note the GPS antenna not to be possible to tear down the outer covering. 4) The GPS wire hideaway and pulls to the main engine nearby, antenna plug insertion main engine corresponding plug.
WT-216 USER MANUAL Negative Triggering WT-216 (V3) – USER MANUAL – Rev 1.0 – Technical Support: Technical@witura.
WT-216 USER MANUAL Positive Triggering Positive/ Negative Triggering WT-216 (V3) – USER MANUAL – Rev 1.0 – Technical Support: Technical@witura.
WT-216 USER MANUAL Pneumatic Lock Triggering How To Search Your Vehicle Position Only suitable of this GPS+GSM Model tracker) As long as you remember the service code of your vehicle, you can track your vehicle everywhere through any mobile phone. For example: if you input inquiry command:“111111CHK”to SIM card number of your GPS/GSM car alarm system (WT‐216), you would get a message “Arm unset, vehicle position:546B6C73,V,114.05113E,22.563638N, V000.0,D000.0,”within 10 seconds.
WT-216 USER MANUAL 2. After installation setup, it would show the following at desk: Click it to enter”Google‐map”, click 3. Enter the longitude and latitude you gained from message, Click inquiry key 4. , and enter the interface: You can use , and you can see the position of vehicle. to reduce the map and amplify the map WT-216 (V3) – USER MANUAL – Rev 1.0 – Technical Support: Technical@witura.
WT-216 USER MANUAL 5. You can name the building and road on the surface in your computer, and register the reference, first click , right –click, and enter For example, input the reference building, Gaosuda Building,and click would show the building you named on the map ,then it Troubleshooting 1. After WT‐216 installed, why there is no response? Check the polarity of power connection to see if a wrong polarity is connected. Check the power is on or not. WT-216 (V3) – USER MANUAL – Rev 1.
WT-216 USER MANUAL 2. Why does GSM fail to communicate? Check if the SIM card is opened Check whether the SIM card has password Check if the SIM card is correctly placed. Make sure the SIM card does support GSM function. Make sure to cut off power, before pulling out the SIM card. If the vehicle is parked in a place where the GSM signal is weak. GSM base station of mobile operator is crashing. Whether this SIM card is suspended (such as forget to pay the bill…) 3.