User manual

WT-2232 32 Channel GSM VOIP Gateway

WT-2232 – USER MANUAL – Rev1.0 – Technical Support: technical@witura.com

WT-2232 32 Channel GSM VOIP Gateway

WT-2232 – USER MANUAL –

Rev1.0

–

Technical Support: technical@witura.com

(i) Pull out the drawer type of SIM slot at the back of the unit

(ii)Take the SIM at the SIM slot

(iii) Push the SIM drawer into the unit

＊ For takeout the SIM, please press the SIM switch until SIM slot out

(4) Input the antenna into the socket.

(5) Plug the end of the conjunction line of the phone (payphone) into the RJ-

11 socket of the Gateway and connect the other end to the

phone(payphone).

(6) Plug the 220v socket and connect the other end to the power socket at

the back of the gateway.

(7) Connect WAN socket to router or HUB through RJ-45 cable

2.6 Connection Figure

3.1 Turn on

Turn on the main power switch and channel power switch, the unit need about

20 seconds to load initialize date automatically and search network, until the

working indicator keep on lighting and WAN indicator been flash.

3.2 Parameter Set via Telephone

You can set through outside phone keyboard, input setting command to enter

into setting.

Please check the connection figure as following:

Parameter