User manual

16
WT-2232 32 Channel GSM VOIP Gateway
WT-2232 – USER MANUAL – Rev1.0 – Technical Support: [e-mail]
COPYRIGHT ©2011 WITURA CORPORATION SDN BHD
4.2.6.1 SIP Setting
(1). SIP Account Register
You can setup all channels use same one SIP account connect to SIP server; or
each channel will use a private SIP account connect to SIP server;
9
WT-2232 32 Channel GSM VOIP Gateway
WT-2232 – USER MANUAL – Rev1.0 – Technical Support: [e-mail]
COPYRIGHT ©2011 WITURA CORPORATION SDN BHD
software
version
B
Speaker
Volume
**30*XX# (X=00-99)
MIC Volume **31*X# (X=00-15)
C
Block
Incoming call
***97*X# X=1 Block, X=0 Allow
CLIR (Call
identication
restriction)
***95*X#
X=1 Caller ID Hide, X=0 Send
Caller ID
Incoming
Caller ID
display
***96(X#
X=1 hiding incoming number, X=0
display
D
PDD Dialing
Setting
***82*X# X=2~9, send Calling time (second)
E
Reset to
Factory
Setting
***###
3.4 For IMEI change
If your IMEI has been blocked by GSM operator, then you can easy change the
IMEI to any 15-digital code. Please check as below, it will guide you for change
IMEI step by step.
3.4.1 Connect the PC COM port and RJ11 socket of Gateway with the data cable.
3.4.2 Turn on the main power switch of the gateway and channel power switch
(channel 1),
3.4.3 Click “Start” -> “Program” -> “Accessory” -> “Communication” -> “Super
Terminal”, then type the command as following:
AT+EGMR=1,7,"123456789012345" ; AT&W
"123456789012345" is IMEI number which you change