User manual

10|Page
User Manual V2.6 Date: 12/6/2012
Permanently Latching both Relays
It is possible also to permanently Latch both Relays either on or off independently without affecting the
default settings of either relay
To permanently latch Relay one on you would send the following SMS Message to the system.
Message Sent *FRL1#1
The visual screen will light up when this message has been received and if it is in the correct format you will
see a momentary indication that confirms it is correct and you will the < OK > and will return a confirmation
SMS Message as.
FRL1<ON> and Relay one is permanently latched on
To permanently latch Relay one back off you would send the following SMS Message to the
system.
Message Sent *FRL1#0
The visual screen will light up when this message has been received and if it is in the correct format you will
see a momentary indication that confirms it is correct and you will the < OK > and will return a confirmation
SMS Message as.
FRL1<OFF> and Relay one is permanently latched back off
The same format is used for Relay two using the *FRL2#1 or *FRL2#0 commands.
Setting the SMS Messaging Matrix
The three administrators can all receive SMS text alerts with the factory default set for administrator one only
to receive these SMS text alerts.
These alerts can be toggled either on or off remotely to suit and is done simply with the *RERN# command
as per the following
To set all three administrators to receive the SMS Text alerts you would send the following SMS Message to
the system.
Message sent *RERN#111
The visual screen will light up when this message has been received and if it is in the correct format you will
see a momentary indication that confirms it is correct and you will the < OK > and will return a confirmation
SMS Message as.
RERN<111> and al three administrators will receive SMS text alerts.
To toggle the SMS text alerts on or off you just use the format of *RERN# and use the 0 for off and the 1
for the on command
Therefore to toggle so only Admin 2 and 3 receive SMS text alerts the SMS Message sent would be as
*RERN#011 and the return message would be RERN:<011> and only admin 2 and 3 receive the SMS text
alerts