User manual

13|Page
User Manual V2.6 Date: 12/6/2012
Input Alarm Message Settings
It is possible to change the Input Alarm display message for both Alarm Input one and Alarm Input two to
suit the customer’s application and the message content can be set up to 50 alphanumeric characters. Only
letters and numbers are allowed, no special characters.
To change the display message for Alarm Input 1 to “Door Opened!” when the input 1 is triggered you
would send the following SMS message to the system.
Message sent *STR1#Door Opened!
The visual screen will light up when this message has been received and if it is in the correct format you will
see a momentary indication that confirms it is correct and you will see the < OK > and will return a
confirmation SMS Message as
STR1<Door Opened!> and the input 1 alarm message has been programmed successfully
To change the display message for Alarm Input 2 to “Gate2 Opened!” when the input 1 is triggered you
would send the following SMS message to the system.
Message sent *STR2#Gate2 Opened!
The visual screen will light up when this message has been received and if it is in the correct format you will
see a momentary indication that confirms it is correct and you will see the < OK > and will return a
confirmation SMS Message as
STR2<Gate2 Opened!> and the input 1 alarm message has been programmed successfully
Input Restoral Message Settings
It is possible to change the Input Restoral display message for both Alarm Input one and Alarm Input two to
suit the customer’s application and the message content can be set up to 50 alphanumeric characters. Only
letters and numbers are allowed, no special characters.
To change the display message for Alarm Input 1 to “Door Closed!” when the input 1 is restored you would
send the following SMS message to the system.
Message sent *STO1#Door Closed!
The visual screen will light up when this message has been received and if it is in the correct format you will
see a momentary indication that confirms it is correct and you will see the < OK > and will return a
confirmation SMS Message as
STO1<Door Closed!> and the input 1 restoral message has been programmed successfully
To change the display message for Alarm Input 2 to “Gate2 Closed!” when the input 1 is restored you
would send the following SMS message to the system.
Message sent *STO2#Gate2 Closed!
The visual screen will light up when this message has been received and if it is in the correct format you will
see a momentary indication that confirms it is correct and you will see the < OK > and will return a
confirmation SMS Message as