User manual

27
WT-9002 IP65 User Manual
WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support: [e-mail]
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Simply send the 2 SMS command as below:
*RLY1#00060
*RLY2#00180
Example of Returned Message:
RELAY1=00060
RELAY2=00180
It is possible to activate the relays to stay on by sending the below SMS command. The
relays will stay ON until the switch OFF command is issued.
Send the following 2 SMS Command:
1) *FRL1#1 – Latch Relay1 to stay ON
2) *FRL2#1 – Latch Relay2 to stay ON
Returned Message:
FRL1<ON>
FRL2<ON>
Send the following 2 SMS Command to turn OFF:
1) *FRL1#0 – Switch OFF Relay1
2) *FRL2#0 – Switch OFF Relay2
Returned Message:
FRL1<OFF>
FRL2<OFF>
4.20 LATCHES THE RELAYS TO STAY ON