User manual

47
WT-9002 IP65 User Manual
WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support: [e-mail]
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
 Built in power supply 15 Volts 1 Amps and fused 2 amps.
 Dual Band (900/1800Mhz) or Quad Band Module (850/900/1800/1900Mhz)
 Power Supply: 100VAC ~ 250VAC
 Operating Temperature - 25 to 55°C
 Humidity Less than 95% RH.
 Lightning Protector: 3-5W
 2 Output relays normally open 240 volts 1 amp.
 Can call up to 3 numbers outbound.
 Battery back-up for up to 8 hours.
 Caller ID for up to 1000 users.
 Connections for manual operation of both output relays.
 Programmable via SMS or Voice.
 Optional LCD for site programming and diagnostic status of system.
 Facility to switch off modem and retain hard wired Intercom if applicable.
 Comes in IP 65 enclosure with external flange mounting.
 C.E Approval
Witura Corporation Sdn Bhd warrantees all WT-9002 GSM Access Control System
against defective parts and workmanship for 1 year. Witura Corporation Sdn Bhd shall,
at its option, repair or replace the defective equipment upon the return of such
equipment to any Witura branch. This warranty applies ONLY to defects in components
and workman-ship and NOT to damage due to causes beyond the control of Witura, such
as incorrect voltage, lightning damage, mechanical shock, water damage, fire damage,
or damage arising out of abuse and improper application of the equipment.
Note: Wherever possible, return only the PCB to Witura Service Centres.
DO NOT return the enclosure.
The WT-9002 IP65 is a product of
Witura Corporation Sdn Bhd
And is Manufactured by
Shenzhen Witura Telecommunications Co., Ltd.
WARNING
For safety reasons, only connect equipment with a telecommunications
compliance label. This includes customer equipment previously labelled
permitted or certified.
8. TECHNICAL SPECIFICATIONS
WARRANTY