Owner's Manual

SETUP WITHOUT APP
If you just bought new W iZ lights and want to
control them without connecting them to
Wi-Fi, you can link them d ir ect ly to the
W i Zmote . Make sure the lights are not already
paired in the WiZ app before you do so.
1
INSTALL YOUR
WiZ LIGHT
Turn off the light you want the WiZmote to
control. Then turn it back on again .
2
LINK WiZMOTE
TO LIGHT
Press the " ON " button 3 times in the first 10
seconds the light is turned back on .
3
ENJOY USING
THE W i ZMOTE
Quick and easy control of your lights.
Notes:
1 You can only link the Wi Zmote w ,t h WiZ li ghts which have a
firmware version above 1.16.0 . If your lights were produced
before 2020 , you wi ll need to pair them in the app .
2. If you pair your li ghts in the app , they wi ll stop respond in g
to the w , zmote they were prev iously linked to un ti l you add
the W,Zmote to the room in the app .
Need help?
Go to faq . wizconnected . com