User manual

WIZ-600Wi User Manual
© Copyright 2008 WIZnet Inc. All rights reserved
10
STEP 4> After 1 minute later, input the address http://192.168.1.254 at the web browser. When
connecting through wireless LAN, if connection is not normally processed, disable the wired
network connection at the Control Panel, and try the connection again.
Figure 3. WIZ600Wi Log-in Screen
STEP 5> If you input ‘admin’ in the Username and Password, you can go to the configuration
page. The default value of both Username and Password is ‘admin’. After changing them, you
should input changed value. If you forget the Username and Password, you can initialize the
module to the factory default by pushing Factory_default button for more than 10 seconds.