User manual

WIZ-600Wi User Manual
© Copyright 2008 WIZnet Inc. All rights reserved
34
4. WIZ600Wi Base board
WIZ600Wi Base Board is the board for testing the WI600Wi module. It is composed of serial port,
LAN port, reset switch and LED.
4.1. Description of base board
Figure 19. WIZ600Wi Base Board
z Ethernet_LINK : It is the LED to display the connection status of wired LAN. The LED
blinks when connection is established with external device and turns off when connection
is closed.
z WLAN_ACT : It is the LED to display the ACT of wireless LAN. LED keeps lightening in
normal time, and turns off at the occurrence of ACT. If data is frequently transferred, LED
operates as flickering.
z Factory_default : It is the switch for module initialization. It is initialized to factory default
by pressing for 10 seconds. If you press it instantly, it operates as general reset switch.
z DB9 : It is the 9pin D-SUB connector for USART IN & OUTPUT. It can be utilized for
Ethernet_LINK
WLAN_ACT
Factor
y
_default
DB9 for USART
(
male
)
RJ45 for wired LAN
(
with transformer
)
DC 5V Input
Power Switch