User manual

WIZ-600Wi User Manual

Figure 22. Configuration Tool – Use Serial Converter

STEP 4> Execute ‘Device Terminal’ program included in the CD. ‘Device Terminal’ is the

combination program of serial terminal and network socket connection programs. It is developed

for more convenient test of serial to Ethernet. Configure the IP address and serial baud rate

according to the value of WIZ600Wi set in the STEP 3. If serial port of the testing PC is occupied

by another program, it can cause abnormal operation of Device Terminal program.

Device Terminal program is composed of upper Serial Terminal and lower Network Terminal. After

configuring serial, click “Open’ & buttons for program operation.

The module is configured as server mode at the ‘STEP3’. Input the module address ‘192.168.1.200’

for IP address and ‘6565’ for the Port in the network terminal window. Click ‘Connect’ button for

the connection with module. If connection is completed, the status information ‘Connected :

192.168.1.200:6565’ is displayed in the lower part of the program.