User's Manual

WizFi 210 User Manual (WIZnet Co., Ltd.)
24
(6) Wireless configuration
Command Parameters Responses / Effects
AT+WRXACTIVE= n=0 (disable) =1 (enable)
If 1, 802.11 radio is enabled.
Ex) AT+WRXACTIVE=1
AT+WRXPS= n=0 (disable) =1 (enable)
If 1, Power Save mode is enabled.
Ex)
AT+WRXPS=1
AT+MCSTSET= n=0 (disable) =1 (enable) If 1, multicast reception is enabled.
AT+WP= <power> 8(Max) to 15(Min)
Transmit power set to <power>.
Ex)
AT+WP=0
AT+WSYNCINTRL= <n> 1 to 65535.
Configure the sync loss interval
Ex) AT+WSYNCINTRL=30
AT+EXTPA= n=0 (disable) =1 (enable)
Enable/disable the external PA
Ex)
AT+EXTPA=0
AT+PSPOLLINTRL= <n> 1 to 65535.
Configure the keep-alive timer interval
Ex) AT+PSPOLLINTRL=45
Table 19. Wireless configuration
(7) Network interface
Command Parameters Responses / Effects
AT+NDHCP= n=0 (disable) =1 (enable) If 1, DHCP is enabled.
AT+NSET=
<Src Address>,<Net-mask>,
<Gateway>
Static network parameters; overrides previous
values.
Ex)
AT+NSET=192.168.3.100,255.255.255.0,192.168
.3.1
AT+DNSLOOK
UP=
<URL>,[<retry>,[<timeout=S>]
Query DNS server for address of hostname
URL.
Ex) AT+DNSLOOKUP=google.com
AT+DNSSET= <DNS1 IP>,[<DNS2 IP>]
Set the DNS server addresses to be used.
Ex)
AT+DNSSET=192.168.3.1
AT+STORENW
CONN
Store network connection parameters prior to
transition to Standby.
AT+RESTOREN
WCONN
Restore network connection parameters after
wake from Standby.
Table 20. Network interface