User's Manual

WizFi 210 User Manual (WIZnet Co., Ltd.)
26
AP>,<Frame Length>
Table 21. Connection management
(9) Battery check
Command Parameters Responses / Effects
AT+BCHKSTRT
=
<Batt.chk.freq>
Start checking battery
each 0 < Batt.chk.freq≤ 100 packets
transmitted.
AT+
BATTLVLSET=
<Warning Level>,<Warning
Freq>,<Standby Level>
Set the battery warning/standby level to
enable the adaptor’s internal battery
measuring logic
AT+BCHK= <Batt.chk.freq> Reset value of battery check frequency.
AT+BCHKSTOP Stop checking battery.
AT+BATTVALG
ET
Retrieve the most recent battery check value.
Table 22. Battery check
(10) Power state management
Command Parameters Responses / Effects
AT+PSDPSLEE
P
Enable SOC Deep Sleep power saving mode.
AT+PSSTBY=
<x>[,<DelayTime>,<Alarm1
pol.>,<Alarm2 pol.>]
Request transition to Standby for x
milliseconds.
Ex)
AT+PSSTBY=60000,1000,1,1
AT+PSSTBY=5000
Table 23. Power state management
(11) Auto connection
Command Parameters Responses / Effects
AT+WAUTO=
<mode>,<SSID>,<BSSID>,[channel
]
Sets WiFi parameters to be used for Auto
Connect.
Mode is 0 for Infrastructure and 1 for Ad-hoc
mode
Ex) AT+WAUTO=0,WizFiDemoAP
AT+NAUTO=
<Type>,<Protocol>,<Destination
IP>,<Destination Port>
Sets network parameters to be used for Auto
Connect.
Type is 0 for Client and 1 for Server;
Protocol is 0 for UDP and 1 for TCP;