User's Manual

WizFi320 User Manual
© Copyright 2021 WIZnet Co., Ltd. All rights reserved. 27
AT+CWLAP="Wi-Fi"
AT+CWQAP: Disconnect from an AP
Execute Command
Command:
AT+CWQAP
Response:
OK
AT+CWSAP: Query/Set the configuration of an
ESP SoftAP
Query Command
Function:
Query the configuration parameters of an ESP SoftAP.
Command:
AT+CWSAP?
Response:
+CWSAP:<ssid>,<pwd>,<channel>,<ecn>,<max conn>,<ssid hidden>
OK
Set Command
Function:
Set the configuration of an ESP SoftAP.
Command:
AT+CWSAP=<ssid>,<pwd>,<chl>,<ecn>[,<max conn>][,<ssid hidden>]
Response:
OK
Parameters
• <ssid>: string parameter showing SSID of the AP.
• <pwd>: string parameter showing the password. Length: 8 ~ 64 bytes
ASCII.
• <channel>: channel ID.
• <ecn>: encryption method; WEP is not supported.
o 0: OPEN