User's Manual

ManualsBrandsWiznet ManualsElectronicsWiFi Module

WizFi630S User Manual

(Version 0.0.1)

For more information, please visit our website at http://www.wiznet.co.kr ,TELL: +82-31-8023-5678

Summary of content (41 pages)

PAGE 1
WizFi630S User Manual (Version 0.0.1) © 2019 WIZnet Co., Ltd. All Rights Reserved. For more information, please visit our website at http://www.wiznet.co.kr ,TELL: +82-31-8023-5678 © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 3
1. Product introduction ............................................................................... 5 1.1. 1.2. 1.3. 1.4. 1.5. 1.5.1. 1.6. 2. The operating mode ..................................................................................... 12 Access point mode ............................................................ ...........................13 Gateway mode ..............................................................................................14 The client (station) ....
PAGE 4
1. Product introduction WizFi630S is RS-232 protocol and TCP /IP protocol IEEE802.11 b / g / n protocol to convert a wireless command gateway module, the serial interface RS- 232 was the installation of equipment connected to lan or WLAN network, remote sensing the management and the possible meaning to the product. moreover, the Embedded switch in function of the public, is to practice.
PAGE 5
1.1. The main function  WizFi630A Pin compatible  580MHz Clock  16-bit DDR2 128Mbytes SRAM, 32Mbytes SPI Flash  Complies with IEEE802.11b/g/n.  Gateway/AP(Bridge)/AP-Client/Client(Station)/Ad-hoc Mode , WDS/Repeater supports  1T1R RF Interface (2.4G only)  Physical link rate up to 150Mpbs  Built-in 3 Ethernet Ports  2 Serial Ports supports  Working as Wi-Fi Router  WEP 64/128bit, WPA/WPA2-PSK TKIP, AES  Router and Firewall function supports Figure 1.
PAGE 6
1.2. The wireless characteristics Operating Channels：USA/Canada: 11(1 ~ 11) Major Europe Countries: 13(1 ~ 13) France: 4(10 ~ 13) Japan: 13for 802.11b(1 ~ 13), 13 for 802.11g(1 ~ 13)，13 for 802.11n(1 ~ 13) Korea/China: 13(1 ~ 13) 1) Product should not collocate with other radio. 2) Host label should content modular FCC ID : 2AKKWWIZFI630S) type of antenna:External Dipole Antenna,Internal Antenna,Rod Antenna. antenna gain tolerance :1~3.2dBi © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 7
1.3. Hardware characteristics Type Description Serial port : 2 EA (optional 3EA) LAN port : 3 EA USB 2.0 port : 1 USB Host Port Interface I2S : 1EA I2C : 1EA PWM : 1EA U.FL(wireless) Temperature Humidity Operation: -25℃~+80℃ Storage: Operation: Storage: Baud Rate : 115200 Stop bits: 1, 2 Serial Parity: None, Odd, Even Flow Control: UART1: none UART2: none Input Power Power Consumption Dimension Weight DC 3.3V / 1A Max : 605.4mA (3.3V) (Device boot up) 33mm X 43mm X 3.8mm 6g Table 2.
PAGE 8
1.4.
PAGE 9
1.5. EVB 1.5.1. Contents Section Qnt. Contents WizFi630S WizFi630S 1ea WizFi630S-EVB WizFi630SEVB 1ea 2dBi WI-FI Antenna (Model : W5I-B0-08) Antenna 1 ea Serial Cable Serial Cable 1 ea LAN Cable 1 ea © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 12
2.Operating mode 2.1.1 Access point mode The wired interface and a wireless interface with a bridge thee. wired / wireless interface is the same ip address field of the network with. DHCP Server function is disable. WizFi630S is the ip address assigned to you. WizFi630S is regularly Station Broadcast Packet transmission, and to maintain the connection. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 13
2.1.2Gateway mode Internet sharing mode of action. WAN interface (network business, the network) and the lan interface (the private network: 192.168.16. xxx), wireless interface (the private network: 192.168.16. xxx) division, # WAN port 0 is designated as a port. WizFi630S is regularly Station Broadcast Packet transmission, and to maintain the connection. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 14
2.1.3Client (station) The wireless interface of the port and the port WAN all Ethernet lan port for the packet. the configuration file, the next time you start in a set of wireless AP to automatically link. through the lan port connected to the private ip address of the equipment. the top of the AP (Gateway) regularly, PING Packet transmission in wireless AP disconnect to prevent. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 15
2.1.4 AP-Client The wireless interface to the wireless interface WAN port, and all of them Ethernet lan port to port packet. Station model and similar, the biggest difference is the wireless interface is AP and Client (Station function at the same time. WizFi630S is regularly Station Broadcast Packet transmission, and to maintain the connection. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 18
2.2.3System Log  System log function, the action of WizFi630S content can be confirmed. 2.2.4 Kernel Log  Kernel log function, the action of WizFi630S content can be confirmed. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 25
2.4 Network 2.4.1 Interface  Network Interface for Scanning WizFi630S  Select "scan" network service mode and set WizFi630S to connect to the network. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 28
2.4.2 Wireless  AP model, Gateway model, AP - Client model in wireless advanced settings.  wireless advanced settings advanced wireless network users with the configuration. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 32
2.4.4.2 The primary port. The external network users WizFi630S internal network connection to use, the application port number of the internal network ip address and the port number to connect function is necessary, but this function was the primary port. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 33
2.5 Serial  Serial 1 serial 2 / # # for individual configuration is possible.  Serial to Wireless (Ethernet) function in order to use the serial Parameters set.  Each serial two channel (Main connection, Aux connection) set.  For each serial port 2 channel (Main connection, Aux connection) configuration management. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 37
2.5.1.4 Ethernet Data Tagging Option Lan communication come from the data sent to the serial port, and serial data by the change in the Main, AUX lan communication can not be divided. this option is enabled, the device connected to the lan communication serial port information can give you. © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 38
. 3 The hardware information. 3.1WizFi630S Pin Map No T Name 1 GND 2 3.3V 3 GND Shared Description 3.
PAGE 39
38 I/O, IPD GPIO_0 GPIO#11 Reset Button Push 39 I/O, IPD I2S_CLK GPIO#3 General Purpose Output LED 40 I/O, IPD I2S_WS GPIO#2 General Purpose Input Switch SW1-1 41 I/O, IPD I2S_SDI GPIO#0 General Purpose Output LED 42 I/O, IPD LINK1 GPIO#42 WPS LED(GPIO20) 43 I2S_DO GPIO#1 GPIO 44 NC 45 NC 46 NC 47 I/O, IPD I2C_SCLK GPIO#4 General Purpose Input Switch SW1-2 48 I/O, IPD I2C_SD GPIO#5 RUN LED 49 GND 50 3.3V 51 GND 52 3.3V Table 1.
PAGE 40
3.2 mechanism design Dimensions (mm) Length Width Height 43 33 3.8 Hole Width 24.2 HOLE Height 40 HOLE Φ 2.5 PCB Thickness 1.1 Tolerance +/- 0.2mm © Copyright 2019 WIZnet Co., Ltd. All rights reserved.
PAGE 41
4. STATEMENT 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.