User's Manual

Repeater Installation
2-17
2-11 STORAGE
Environmental conditions during storage and shipment should normally be limited as follows:
a. Maximum humidity: 95% (no condensation)
b. Temperature range: -40°C to +85°C
2-12 PACKING FOR RESHIPMENT OR STORAGE
If the R19X0 must be prepared for reshipment or storage, use the original packing and shipping
materials, if possible. Otherwise, the following general instructions should be used for repackaging
with commercially available materials:
a. Wrap unit in heavy paper or plastic.
b. Use a strong shipping container. A double-wall carton made of 350-pound test material
is adequate.
c. Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inch) thick around all
sides of the instrument to provide firm cushioning and prevent movement inside
container. Protect rear panel connectors with cardboard.
d. Seal shipping container securely.
e. Mark shipping container FRAGILE to ensure careful handling.
f. In any correspondence, refer to instrument by model number and full serial number.