User's Manual

MPR series User’s Manual: Draft version 0.95 11/4/04 page 15
1.4.3 Windows CE / Pocket PC devices
1.4.3.1 Installing the Pocket PC Demo
Note that the MPR card may be installed in the handheld device at any time during the installation process.
1) Attach Pocket PC device to PC and make ActiveSync connection.
2) Browse to the MPR install CD
3) From the CD root directory, launch "WJReader_PPCsetup.msi". This will guide you through the install
process.
4) Click Next to start.
5) Install to the default location, and select whether to allow all users to use the demo when installed
(usually "Everyone" is the preferred option).
6) Click Next to continue.
7) Click Next again to start install.
8) The installer copies files.
9) An Add/Remove Programs box should appear. This will allow you to download & install the demo to
an attached Pocket PC device.
10) Click "Yes" to install "WJ Communications MPR Demo".
11) Check the device screen for any messages, and click OK on the PC.
12) Click Close to exit.
13) An "MPR Demo" shortcut to the installed application should now be in the Program Files directory,
accessible through the PocketPC start menu.
1.4.3.2 Running the Pocket PC demo
1) A shortcut to MPR Demo should be installed in the program files directory.
2) Launch the Demo Application.