User manual

Industrial Cellular Router User Manual
www.wlink-tech.com 10
There are some different for Antenna interface and indicator light for the
expanded Wi-Fi, GPS series.
Table 2-3 Router Interface
Port
Instruction Remark
USIM Plug type SIM Slot, support 1.8/3V/5V automatic
detection
3G 3G antenna, SMA connector, 50Ω
WiFi Wi-Fi antenna, SMA connector, 50Ω Optional
GPS GPS antenna, SMA connector, 50Ω Optional
LAN
10/100Base-TX，MDI/MDIX self-adaption,
R200: 1*LAN
R520: 4*LAN
WAN
10/100Base-TX，MDI/MDIX self-adaption
R20 serial port
and WAN port
multiplex
RST Reset button,(press on button 5 seconds)
PWR Power connector
5 ～ 26V DC
WAN/CON
Four pin serial port, suitable for collection device
with RS-232 or RS-485 interface, for wireless data
transmission, CON for debug test.
R20 serial port
and WAN port
multiplex
2.2 LED Status
Table 2-4 Router LED indictor Status
silk-screen color status Indication
NET
Green Blink Strong Signal
Orange Blink Normal Signal
Red Blink Weak Signal
Blinking
slowly(2s)
Already login network or dialing online. LED color is
matched with signal indication. For example, for
strong signal, after login network or online, it will
blink green light.
Blinking
quickly(0.5s)
Dialing
WLAN
Green
Solid light
WLAN port open, but no data sending.
Green
Blinking
quickly
Data is in transmitting