User manual

Industrial Cellular Router User Manual
www.wlink-tech.com 13
3 Router Configuration
This Chapter introduces the parameter configuration of the router, the router can be
configured via web internet explorer, or Firefox, chrome. We take GUIs 7 system and
Internet Explorer 9.0 as sample.
3.1 Local Configure
The router supports configurated by local Ethernet port, You could specify a static IP or
DHCP get IP for your computer. The default IP address is 192.168.1.1，subnet mask is
255.255.255.0, please refer to followings:
Step 1 Click
“start > control panel”
,
find “Network Connections” icon and double click it to
enter, select “Local Area Connection” corresponding to the network card on this
page. Refer to the figure below.
Figure 3-4 Network Connection
Step 2
Obtain a IP address automatically or set up IP address,192.168.1.xxx(XXX can be
any number between2～254)
Step 3
Run a Internet Explorer and visit “
http://192.168.1.1/
”, to enter identity page.