User manual

Industrial Cellular Router User Manual
www.wlink-tech.com 27
parameter Instruction
Password As the configuration requested.
Encryption As the configuration requested.
Stateless
MPPE
As the configuration requested.
Accept DNS As the configuration requested.
Remote Subnet As the configuration requested.
Create NAT on
Tunnel
As the configuration requested.
Step 2
Please click ”save” to finished.
3.6 System Management
3.6.1
Identification
Step 1
Please click ”Administrator> Identification” to open the GUI, you may modify
the router name, Host name and Domain name according to self requirement.
Figure 3-12 Router Identification GUI
Table 3-12 “Router Identification” Instruction
parameter Instruction
Router name Default is router, can be set maximum 32 character
Host name Default is router, can be set maximum 32 character
Domain name
Default is empty, support maximum up to 32 character, it is