User's Manual

Mirobot Mirobot Robot Users Manual
Document version Users Manual Beijing Tsinew Technologies Co.,Ltd.
1. Safety precautions
This chapter introduces the safety precautions when using this product. Please read this
manual carefully before using the manipulator for the first time. This product should be used in an
environment that meets the requirements. Do not modify the product without authorization.
Otherwise, it may cause product failure, even personal injury, electric shock, fire, etc. Informal
writing. The installation, operation, teaching, programming ,and system development personnel of
the manipulator must first read the manual carefully and use the robot in strict accordance with the
specifications of the manual.
1.1 General Safety
Danger
the manipulator belongs to live equipment. Nonprofessionals are not allowed to change the circuit
at will. Otherwise, it is easy to cause injury to the equipment or personal.
When using the manipulator, the following safety rules shall be followed:
 When operating the manipulator, the local laws and regulations shall be strictly observed.
The safety precautions described in the manual are only as a supplement to local safety
regulations.
 To engage the "danger," "warning," and "precautions" described in the manual are only used
as supplementary instructions for all safety precautions.
 To engage, please use the manipulator within the specified environment. If the manipulator is
used beyond the specification and load conditions, the product will be shortened the service
life even damages the equipment.
 To engage the personnel responsible for the installation, operation ,and maintenance of the
Mirobot manipulator must first receive strict training, understand various safety precautions,
and master the correct operation and maintenance methods before operating and maintaining
the robot.
 To engage high corrosive cleaning is not suitable for the cleaning of manipulator, and
anodized parts are not suitable for immersion cleaning.
 To engage, it is not allowed to repair the faulty products or dismantle the manipulator without
professional training. If the products fail, please contact Mirobot technical support engineer
in time.
 If the product is scrapped, please correctly dispose of industrial waste in accordance with
relevant laws and protect the environment.
 To engage the packing box of the manipulator contains small parts. Do not let children play,
to prevent swallowing.
 During the use of children, someone must be on the side to monitor, and the equipment shall
be shut down in time when the operation is completed.
 In the process of robot movement, please do not extend your hand into the movement range
of the manipulator, be careful of bumping and pinching.
 It is strictly prohibited to change or remove and modify the nameplate, description, icon ,and
mark of the manipulator and related equipment.