User manual

10
Safety function
The processor’s motor will only start when the drive unit (2) is correctly fitted.
Donot remove the drive unit (2) while the device is operating.
Cleaning and Care
Remove the mains plug after use. Never immerse the drive unit (2) in water,
simply wipe it with a damp cloth. Do not use any abrasive cleaning agents. Take
care when cleaning that you do not injure yourself on the sharp blade (4). Food
residues could get into the blade slot. Remove this after each use.
dishwasher safe
can be rinsed
under running
water
wipe with a
damp cloth
Drive unit (2)
Splash guard (3)
Stainless steel
blade (4)
Glass container (5)
For UK use only
▪ This product is supplied with a 13 A plug conforming to BS 1363 fitted to the
mains lead. If the plug is unsuitable for your socket outlets or needs to be
replaced, please note the following. If the plug is a non-rewireable one, cut
it from the mains lead and immediately dispose of it. Never insert it into a
socket outlet as there is a very great risk of an electric shock.
▪ The replacement of the plug at the mains lead has to be done according to the
following instructions:
Important: The wires in this mains lead are coloured in accordance with the
following code:
blue Neutral
brown Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
⋅ the wire which is coloured blue must be connected to the terminal which
is marked with the letter N or coloured black,