Operation Manual

27
User Manual WMF1500S
Software | SteamJet
4.4 SteamJet
Burn hazard/scalding hazard
• Hot steam is produced by the cup warmer.
• The adjacent surfaces also become hot.
> Use heat-resistant cups.
> Always place acup upside-down over the
cup warmer before dispensing steam.
> Do not touch the adjacent surfaces
immediately after dispensing.
> Do not touch the spouts immediately after
dispensing.
> Never use the SteamJet function without
the drip tray grid in place or without the cup
warmer insert.
Health hazard/hygiene
• The SteamJet function is intended for
warming the drinking vessel and is not
intended to be used for cleaning.
> Always use freshly rinsed drinking vessels
when warming cups.
4.4.1 SteamJet pad
 Place acup on the cup warmer with the opening
facing downward
 Press
Hot steam slowly flows into the cup from below.
The steam flow stops after 6seconds.
Touch the SteamJet pad again during the dispensing to
stop the dispensing before it is finished.
CAUTION
Observe the Safety chapter
w starting on page 6
Clean drip tray daily
Care
w starting on page 54
CAUTION
Observe the Safety chapter
w starting on page 6
SteamJet pad active/inactive
w Operating options
page 39
This description corresponds to the
standard spelling.
Dispensing option = metered.