Instruction Manual

ManualsBrandsWMF ManualsCoffee machinesWMF WMF 9000 F filter coffee machines

WMF coffeemachines

WMF 9000 F (external storage) planning information

http://www.wmf-kaffeemaschinen.de/fachplaner

WMF GmbH | WMF Platz 1 | 73312 Geislingen (Steige)

On site

5x2,5 mm

, length

appr. 2.2 m

Optional:

Area for counter cut out water,

waste water, electrical connection

8.4 – 10.1 kW minimum Ø70

12.4 – 14.7 kW minimum Ø80

Optional feet

Ø 40 mm

Thermal container 40 liter (20 liter)

Summary of content (4 pages)

PAGE 1
µ WMF coffeemachines WMF 9000 F (external storage) planning information Thermal container 40 liter (20 liter) Optional feet Ø 40 mm Optional: Area for counter cut out water, waste water, electrical connection 8.4 – 10.1 kW minimum Ø70 12.4 – 14.7 kW minimum Ø80 On site 5x2,5 mm2, length appr. 2.2 m On site http://www.wmf-kaffeemaschinen.
PAGE 2
WMF coffeemachines µ WMF 9000 F (external storage) planning information Conditions for usage and installation Any necessary on-site preparatory work for electricity, water and drainage connections at the customer‘s premises is to be arranged by the machine owner / operator. The work must be carried out by authorised installation technicians in compliance with general, country-specific and local regulations.
PAGE 3
WMF coffeemachines µ WMF 9000 F (external storage) planning information Installation Clearance For operating, service, and safety reasons the machine should be installed with a clearance from the building or non-WMF components of not less than 50 mm at the sides and 60 mm at the back. A minimum working space of 800 mm in front of the coffee machine is recommended. Clearance of at least 200 mm above the product hopper is recommended.
PAGE 4
WMF coffeemachines µ WMF 9000 F (external storage) planning information Water supply and drainage The water supply must be located close to the machine (max. distance 800 mm). An anytime easily accessible and sufficiently dimensioned water tap (preferably ball tap) as well as a dirt filter with mesh size 250 sq.m must be installed below the counter in the water supply. For connection from below through the counter a cut-out must be made in the hatched area on-site according to drawing (see top view).