User manual

26
User manual for WMF Cup&Cool
Care
4.4 Defrosting the cooler
If the ice layer is more than 3 mm thick, defrost the
cooler.
For coolers with integrated low-level warnings, any ice
buildup on the rear vertical wall should be avoided.
This prevents malfunctions.
Switch off the cooler at the On / off switch at the top 
right on the rear wall
Leave the front door open 
Wipe away the water from melting ice with a soft cloth 
Close the front door before switching on again 
Never remove the ice layer with sharp or pointed objects.
The surface of the cooling compartment can be damaged.
Chapter 5 Safety
5.1 Hazard to the operator
At WMF, safety is one of the most essential product
features. The effectiveness of safety devices can only be
ensured if the following points are observed:
Read the user manuals carefully prior to use. •
Do not touch hot device components. •
Do not use the device if it is not working properly or if •
it is damaged.
Built-in safety devices must never be altered. •
This device is not designed for persons (including •
children) with limited physical, sensory or mental
capabilities or who lack the required experience
and / or knowledge, unless they are supervised by
a person responsible for their safety or have received
instructions from them about how the device should be
used.
Children should be supervised to ensure that they do •
not play with the machine.
Observe the manual.
Observe the chapter Safety.
Failure to observe
hazard instructions
can lead to
serious injury.
Follow the safety instructions.