Quick Start Guide

14. Airtime Allocation

Slide the Enable switch to the right to activate this function. The switch will turn blue when

airtime allocation is enabled. To disable airtime allocation, slide the switch to the left.

When ATF is enabled, the system needs to be restarted for it to take effect.

In the Airtime Allocation Policy pull-down menu, two policy options are available: Fair and

Strict.

Use the slider below the Airtime Allocation Policy pull-down menu to adjust the percentage

of resources allocated to the primary and guest Wi-Fi networks. Sliding the bar to the right

increases the allocation percentage for the primary Wi-Fi network, while sliding the bar to the

left increases the allocation percentage for the guest Wi-Fi network. The allocation

percentages for the primary and guest Wi-Fi networks are shown in the two fields on the

bottom of the page, and change in real-time when the slider is adjusted.

15. PMF

Slide the switch to the right to enable PMF (protected management frames) on your 5G

FWAR.