Quick Start Guide

28
Use this function to toggle whether the DNS server is set automatically or manually.
DHCP
DHCP assigns LAN IP addresses for connected devices. You can specify the range of IP
addresses the 5G FWAR may assign to devices. Click the DHCP switch to turn the DHCP
function on or off. You can also enter the desired information in the following fields:
32. DHCP Start Address
Specify the address that starts the range for the pool of IP addresses in the same subnet as
the 5G FWAR.
33. DHCP End Address
Specify the address that ends the range for the pool of IP addresses in the same subnet as
the 5G FWAR.
34. Lease Time
You can specify a period of time after which an assigned IP address will be retrieved from
devices.
35. UPnP
For devices that support Universal Plug and Play (UPnP), enabling the UPnP function will
allow automatic port forwarding. This helps your UPnP devices communicate with the
Internet.
Slide the UPnP switch to the right to enable the feature. Slide the Enable Automatic
Cleanup of Old Unused UPnP Service switch to enable the automatic cleanup of invalid
rules. When enabled, old and unused UPnP defined services will be removed.