Quick Start Guide

Chapter 2

Installation and Mounting

Installing the 5G FWAR

Step 1 5G FWAR front side should face indoor. 5G FWAR rear side should face the

5G signal (outdoor). Power on the 5G FWAR. The device will enter installation

mode.

Step 2 Connect the 5G FWAR to your smart phone. First turn off the Wi-Fi function

on your phone, then turn on the camera and scan the QR code printed on the

product label.

Step 3 A pop-up window will appear asking if you wish to join the Wi-Fi network as

indicated in the popup window.

Note: In order to enable Wi-Fi automatic connection via QR code scanning, the

operating system on your phone must be Android 10/ iOS 11 or above. If not, you

will need to input information manually.

Step 4 After you join the Wi-Fi network, a browser page will pop up automatically to direct

you to the installation page.