Use and Care Manual

CAUTION

a. concrete wall

b.wall stud

1. Mark the mounting hole locations by using the holes in the bracket as a guide, then drill the holes.

A. For concrete wall installation, after drilling, you would insert the wall anchors and tap them flush with

the wall, position the bracket and then screw the two bolts into the anchors, securely attaching the

bracket to the wall.

B. For wall stud installation, after drilling the smaller diameter pilot hole, position the bracket and screw

the two holts into the wall until they are secured.

The fan is only suitable for concrete wall or direct to stud installation. Do not use for dry wall mounting. Use

the mounting accessories shipped with products for wall mounting.

2. Assemble the motor Z brackets by fastening screws and nuts.

This fan is to be mounted with wall bracket, it MUST be mounted and secured on a solid wall that is structurally

sound to support the fan and mounting bracket. The wall bracket along with the fan MUST NOT be mounted on

any surface that is subject to vibration, wobbling, movement or the like. The fan MUST be mounted and properly

secured to a stationary structure.

WARNING

ASSEMBLY INSTRUCTION