User guide

821042: RMT-170e Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
13
RMT-170e HD Series User Guide
Front Panel Controls
• Audio Levels: Levels for audio channels the are displayed on up to
eight meters in pairs, as two or four meters on each side. The A
model displays two to four meters.
• IMD: The OSD Menu provides settings to customize the IMD
(In-Monitor Display) text area to show a line of characters, numbers,
and/or some symbols. The IMD displays in a 4:3 image and below a
16:9 image.
• Speakers: Audio may selected for monitoring through the left and
right speakers.
• Time Code: The de-embedded time code from the HD/SD-SDI
source displays in the bottom right corner.
• Waveform: The signal waveform is configurable in the OSD Menu.
Figure 1–2 Front Panel Controls
Button/Indicators
• Power (Button/Indicator): As an indicator, the Power button glows
green when power is on (switch is on the back panel) and a signal is
detected. It glows red when the power is on and no signal is present.
As a control, it turns the signal display on the monitor on and off.
• Inhibit (Button/Indicator): This indicator glows green when the
control panel buttons have been locked and the system must be
unlocked through the
OSD Menu.
Inhibit
Indicator
Power Button
/ Indicator
SDI Input
Buttons /
Indicators
Line 1 & 2
Buttons /
Indicators
DVI-I Button
/ Indicator
Aspect Button
/ Indicator
F# Key Button
/ Indicators
Menu
Operation
Buttons
Brightness
Rotary Knob/
Indicator
Volume
Rotary Knob/
Indicator
Phase Rotary
Knob/
Indicator
Chroma
Rotary Knob/
Indicator
Status Button
/ Indicator
Scan Button /
Indicator
Contrast
Rotary Knob/
Indicator
Headphone
Jack