User guide

821042: RMT-170e Series User Guide

RMT-170e HD Series User Guide

FCC Compliance

3. Use the included screws to attach either option. The table stand

attaches on the rear bottom of the unit and the rack ears attach to the

sides.

4. Use the included M3 x 12 mm screws to attach the optional battery

mount, attach it to the rear of the monitor.

5. Place the RMT-170e HD Series monitor in the required location for

operation.

6. Connect the required signals. For BNC connections use 75 -rated

connectors.

7. Connect A.C. mains power using the included EIC power cord. Please

ground the unit to ensure proper operation.

8. Turn on the mains power using the toggle switch located on the rear of

the RMT-170e HD Series monitor above the power connector.

FCC Compliance

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Features

The RMT-170e HD Series monitors are 17" multiple function TFT-LCD

monitors with 1366 x 768 screen resolution (16:9 native aspect).

Interlaced signals are processed by using a 3D comb filter and 3D