User guide

AMP1A Series User Guide

Description

Power

Each unit comes with a standard 24VDC/3.0A internal power supply

and connects an A/C mains power source (65W, 100 to 240 VAC, 50/

60Hz) to the IEC connector provided on the rear panel of the unit.

Electrostatic Discharge (ESD)

As with most electronic equipment, static discharges can damage

components within the unit. Take precautions to ensure your

installation environment is not subject to ESD.

Description

All models in the AMP1A series contain four high performance

transducers driven by three power amplifiers: two amplifier/driver

combinations handle midrange and high frequency information in

stereo, while the third center channel reproduces information below the

500 Hz crossover point through dual woofers.

All AMP-1A analog audio models come equipped with stereo volume

and balance potentiometers, a power indication LED, and a headphone

output. Output limiter circuits are incorporated to protect the speakers,

and extensive magnetic shielding allows placement immediately

adjacent to video monitors with no color impurities.

Application

The AMP1A Series is ideally suited for use in VTR bays, mobile

production vehicles, teleconferencing installations, multimedia

systems, satellite links and cable TV facilities, and on-air radio studios.

Designed and manufactured in the U.S., the AMP1A is backed by a

strong warranty and a satisfaction guaranteed return policy.