User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
90
Chap ter 5 M enu L ist
AES In pu t C on fi guratio n Me n u
• Overall Offset Level: Rotating this knob selects between four
possible level reductions for the center channel in the downmix: 0
dB , -3 dB , -4.5 dB , or -6 dB .
• Parameter Source: This control enables or disables the application
of received center and surround level data, either SMPTE 2020 or
Dolby, as set in the Metadata Select Menu . If metadata is
received from the selected SMPTE 2020 or Dolby decoder source, it
will be substituted for the fixed settings that are also set in this
menu. If no metadata is available, then the fixed settings are used.
Rotating this control selects either Fixed Settings or Metadata
Values .
AES Input Configuration Menu
This menu allows you to set the termination on the input connectors.
Figure 5–5 AES Input Configuration Menu
Configuration Selection
Menu
Main Screen
Audio
Processors
Audio Processor Card Menu
AES Input Card
Configuration AES Input
Configuration Menu
Save / ExitHelp Cancel
1 2 3 4 5 6 7 8
AES
75-ohm
Term
Terminate
All
AES Input Slot 4 Configuration Menu
Input Terminated
Input Not Terminated