User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
92
Chap ter 5 M enu L ist
AES/ An alog Output Configura ti on Menus
Follow Monitor Mode Controls
In Follow Monitor mode (Figure 5–6 below) you can direct the channels
selected in the Monitor Mixer Configuration Menu (Figure 5–7 on
page 93) to be output through the AES Output Card.
Figure 5–6 AES Output Configuration Menu -
Follow Monitor
• Mixer Channel Select: Rotating this knob moves a highlight
between the source channels. Other controls then affect the selected
channel.
• Channel Trim: Rotating this knob changes the gain on the selected
channel. This control has a range of -60 dB to +12 dB (inclusive) in 1
dB increments. You can mute the channel by turning the knob
counterclockwise beyond -60 dB. Pressing and holding this knob
returns the setting to 0 dB.
• Select Affect: Pressing or rotating this knob selects Yes or No , and
determines whether all the outputs are affected by the Cluster
Select hot keys on the Main Screen .
• Main Volume Affect: Pressing or rotating this knob selects Yes or
No , and determines whether all the outputs are controlled by the
front panel Volume control.
• Mute with Phones: Pressing or rotating this knob selects Yes or
No , and determines whether all the outputs are muted by the
presence of a plug in the front panel headphone jack.
Save / ExitHelp Cancel
Mute
With
Phones
Yes
AES Output Slot 4 Configuration Menu
Free Mix
Follow
Monitor
Follow
Monitor
+0 +0 +0+0
L. Front R. Front Center LFE
Yes
Yes
Select
Affect
Main
Volume
Affect
Mixer
Channel
Select
Output
Trim
Output 1 Output 2 Output 3 Output 4