User guide

ManualsBrandsWohler Manualsaudio & home theatreAMP2-VS

101

102

103

104

105

106

107

108

109

110

821116: AMP2 -1 6 V S e r i e s U se r Guide

Chap ter 5 Menu List

Ar bi tr ary Pha se M eas urement M enu

Figure 5–8 Arbitrary Phase Measurement Menu

• Phase Compare A: Rotating this knob steps through the channels

(and also displays their functions as assigned on the

Monitor

Mixer Configuration Menu

.) The channel(s) selected by

Phase

Compare A

are the

Reference Channels

in each phase

comparison. Use this control in conjunction with

Phase

Compare B

to set up each phase measurement relationship.

• Select Phase Pair: Rotating this knob moves the highlight from

channel pair to channel pair;. Pressing this control to light the

indicator enables a phase comparison between the two channels on

this line.

• Phase Compare B: Rotating this knob steps through the audible

channels (except for the one you have already selected in

Phase

Compare A

). The channel(s) selected by

Phase Compare B

are

the

Test Channels

to be compared to the

Reference Channels

Use this control in conjunction with

Phase Compare A

to set up

each phase measurement relationship.

• If a

Test Channel

is out of phase with its

Reference Channel

then the

Test Channel

will be shown with a filled triangle, while

the

Reference Channel

will be shown with an empty triangle.

Arbitrary Phase Measurement Menu

Save / ExitHelp Cancel

None

Select

Phase Pair

Phase

Reference

Channel

Phase Test

Channel

Reference

Channel

Test

Channel

Indication

Color

Note:

The colors for each arbitrary phase indication are

automatically and sequentially selected.

Note:

The same channel may not be both a

Reference Channel

and a

Test Channel

Note:

Any given

Reference Channel

may be used in more than

one comparison.