User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
96
Chap ter 5 M enu L ist
Audi o Proce ss or C ard M enu
Audio Processor Card Menu
The Audio Processor Card Menu allows you to select each optional
module independently to configure inputs, mixing, and outputs.
Figure 5–9 Audio Processor Card Menu
Slots 1 through 5: Each occupied slot displays the name of the card in
that slot. Press the knob of the corresponding card to display the
Configuration Menu for the card in that slot. If a slot is empty, the
label will be gray and disabled, no card name will appear, and the knob
will have no function. Rotating the knob does nothing; select the card
by pressing the knob. Refer to the AES/Analog Output Configuration
Menus on page 91 for configuration option examples.
• 3G SDI I/O: Pressing a knob with this description displays the 3G
SDI Output Configuration Menu . You can delay the input
signals in this menu.
• Analog Input/Output: Pressing a knob with this description
displays the Analog Output Configuration Menu . In this menu
signals can be mixed to output through the analog outputs.
Configuration Selection
Menu
Main Screen
Menu
Audio
Processors
Audio Processor Card Menu
Audio Processor Card Menu
Save / ExitHelp Exit
3G SDI I/O Card
Configuration
Slot 1
No Card Installed
Analog I/O Card
Configuration
AES Output Card
Configuration
AES Input Card
Configuration
Slot 5
Slot 3
Slot 4
Dolby Card
Configuration
Dolby
Slot 2
AES/SDI
Outputs
Pass Dolby
Block Dolby