User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
98
Chap ter 5 M enu L ist
Automation Me nu
Automation Menu
This menu allows you to set the system so that it automatically
performs certain functions based on conditions you set.
Figure 5–10 Automation Menu
This menu shows ten Condition / Response lines that you can
individually enable or disable. Each line automatically enables when
either a Condition or a Response is selected. Lines that do not have
both a Condition and a Response are automatically deleted when
you exit the menu. The priority of each Condition / Response is
determined by its position in the list: The higher the position, the higher
the priority.
In operation, if more than one condition is met, the one higher in the list
will rule. The Response events are edge triggered, that is, they will
only take effect when a change occurs. You can therefore override any
automated change at any time. And your changes stay in effect until the
current condition is removed and then met again, or until another
Configuration Selection
Menu
Main Screen
Menu
Configure
Options Option
Configuration Menu
Automation
Menu
Automation Menu
Automation Menu
Help Cancel
Condition
Slot 1 3G SDI I/O = HD
Slot 1 3G SDI I/O = SD
Response
P3 HD Preset
P2 SD Preset
Select
Row
Select
Condition
Slot 1 3G SDI I/O (Pr 1) = Dolby
--
P4 5.1 Chan
--
--
--
--
--
--
--
--
--
--
--
--
--
Save / Exit
Auto
Mode On
Select
Response