User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 0 14 Wohler Te c h no l o g i e s, Inc. All rights re se r ved..
99
Chap ter 5 Menu List
Automation Me nu
condition is met. As long as a high priority condition is met, lower
priority conditions are ignored.
Responses can only take effect when the Main Screen is displayed.
If a Condition is met when control is in the Dolby Zoom Screen or
Loudness Screen , the Response will be delayed until the Main
Screen is once again displayed. This will prevent a preset change from
interrupting your analysis in the Dolby Zoom Screen or a loudness
measurement in the Loudness Screen . Likewise, if a Condition is
met when control is in any of the menu screens, the Response will be
delayed until all menus are exited to avoid any unexpected changes.
Controls
• Select Condition: Rotating this control selects from the set of
possible conditions:
• Slot n SDI-3G In = (SD, HD, 3G)
• Slot n SDI-3G In = Unlock
• Slot n SDI-3G In Pair m = Dolby
• Slot n SDI-3G In Pair m = No Dolby
• Slot p AES In Pair m = Lock
• Slot p AES In Pair m = Unlock
• Slot p AES In Pair m = Dolby
• Slot p AES In Pair m = No Dolby
• Default
where:
1) Slot n is between 1 and 3, limited by the number of SDI
cards installed,
2) Slot p is between 1 and 5, limited by the number of AES
Input cards installed, and
3) Channel Pair m is between 1 and 8.
• Select Row: Rotating this control selects the row that the
Conditions and Responses will be set on. When pressed, the
currently selected row is toggled between enabled and disabled.