User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 0 14 Wohler Te c h no l o g i e s, Inc. All rights re se r ved..
103
Chap ter 5 Menu List
Dolb y Decod er Co nf igura ti on Menu
channel pairs that you will monitor and that will appear on the
meters. You will also define the function of each channel. See
I. Configure the Monitor Mixer on page 5 or Monitor Mixer
Configuration Menu on page 125 for details.
• Configure Main Screen: Pressing this knob displays the Main
Screen Configuration Menu as well as other features related to
the Main Screen . (See III. Arrange the Main Screens on page 9 or
Main Screen Configuration Menu on page 120 for details.)
• Manage Presets: Pressing this knob displays the Preset
Management Menu where you can save, name, and manage
presets. (See V. Save Your Setup in a Preset on page 15 for details.)
• SDI Input Select: This control appears when one or more 3G SDI
cards are installed. Rotating this knob moves the red selection box
from input to input on each installed card. Pressing this knob selects
the input source (from 1 to 2 or from 2 to 1) for that card.
• Audio Processors: Pressing this knob displays the Audio
Processor Card Menu and identifies the card in each slot. It also
allows you to set up parameters for each installed audio processor
card.
Dolby Decoder Configuration Menu
Figure 5–13 Dolby Decoder Configuration Menu
Im por ta nt :
The Dolby Configuration and Metadata screen is only available
when the Dolby D/E/DD+ Card is installed.
Dolby Decoder Configuration Menu
Save / ExitHelp Cancel
Decoder Source
Pro-16 Mode
Channel
Dolby E
Program
Slot 1 (AES
In) Pair 1
Channel 1
Program 1
Decode
Aux Pair
DRC Mode
All formats
LtRt Downmix
Line Mode
Coding Mode
1/0 (C)
Bitstream Mode
Complete Main
Dialogue Level
- 27 dBFS
Frame Rate
29.97 fps
LFE Channel
Disabled
Surround Mode
Not Srnd Encoded
Mdata Scroll
CRC Error
Reporting
On