User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 0 14 Wohler Te c h no l o g i e s, Inc. All rights re se r ved..
117
Chap ter 5 Menu List
Lo ud ne ss Meas urement Menu
Figure 5–20 Loudness Clusters Menu
• Measure On/Off: Rotating this knob moves the highlight from one
cluster to the next. Pressing this knob toggles whether this cluster
can be chosen for loudness measurement by a Select Cluster hot
key or by the Select Cluster control on the Loudness Screen .
• Default Cluster: The default cluster is the cluster for which
loudness is measured on the Main Screen if no other enabled
clusters are selected. Rotating this knob sequences through each of
the clusters. Pressing this knob selects the default cluster. When set
to Off , no cluster is the default.
Loudness Measurement Menu
The Loudness Measurement Menu sets loudness parameters and
controls what loudness indications are displayed on the Main Screen
and on the Loudness Screen .
Loudness Clusters Menu
Save / ExitHelp Cancel
Default
Cluster
Cluster
1
2
3
4
5
6
7
8
Name
Pair 1
Pair 2
5.1 Channels
Pair 6
Pair 7
Pair 8
Measure
On/Off
Off
Loudness Measurement
Menu
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen Main Screen
Configuration Menu
Configure
Loudness