User guide

821116: AMP2 -1 6 V S e r i e s U se r Guide
© 2 014 Wo h l e r Te c h n o l o g ies , In c. A l l r ights re se rve d.
128
Chap ter 5 M enu L ist
Opti on Conf iguration M enu
Option Configuration Menu
This menu allows you to determine exactly how you want the audio to
come through the internal speakers and whether you want to enable
the Main Screen solos/mutes for this source. It also provides a link to
the Hardware Configuration Menu .
Figure 5–26 Option Configuration Menu
• Select Cluster: Rotating or pressing this control determines
whether you can select a single cluster, or multiple clusters to be
heard at once.
• Monitor Mixer Trims: Rotating or pressing this control determines
whether the eight pairs of Channel Trim controls on the Monitor
Mixer Configuration Menu will be enabled for adjustment. This
setting does not affect the SuperPair, which will always have its
trim controls enabled.
• Solo Mode: Rotating or pressing this knob determines whether the
individual channels soloed by the Select Cluster controls are
heard in their native position or in place on the left and right
speakers. When the monitor mix is fed to an Analog or AES output
Configuration Selection
Menu
Main Screen
Menu
Configure
Options Option
Configuration Menu
Option Configuration Menu
Save / ExitHelp Cancel
Configure
Hardware
Enabled
Disabled
Multiple
One at a Time
Select
Cluster
Monitor
Mixer
Trims
Solo Mode
5.1
Downmix
Paramters
In Place
Left-Cntr-Right